
Use the search bars and select from the items below
Use the search bars and select from the items below
Use the search bars and select from the items below





Key Specifications
Key Specifications
Key Specifications
Key Specifications
Example: A10RCFRxxx
Example: A10RCFRxxx
Site Search
Catagories
Sub-Catagories
Search by Model Number
Please use "xxx" for color code
Example: A10RCFRxxx
Filtered Results
Filtered Results Will Appear Immediately Below. Page will not reload. Click the image or button to go to product specification page.
If no more results are available button will remain light blue
.png)
Cut Your Pool Pump Costs Instantly
Your pool pump is one of the biggest energy consumers in your home. By adjusting its speed, you can dramatically cut costs without sacrificing performance. Use this calculator to compare energy usage, flow rate, and savings at different speeds. See how much you could be saving today!
Section 1: Pump Details (Current Setup)
Note: The full-speed RPM for our Pipeline Pumps is 3400. However, other pumps commonly use a 3450 RPM setting.
Section 2: Cost and Run Time
2025 Average Energy Costs per KWh
National Avg. 32.68¢/kWh, California 32.68¢/kWh, Florida 14.27¢/kWh, Texas 15.60¢/kWh, Arizona 13.16¢/kWh, Nevada 11.67¢/kWh
💡 POOL PRO TIP

Maximize Efficiency with the AquaStar Pipeline FiltersⓇ*
Traditional pool filters are designed to reduce water turbidity by 70% after five turnovers, as per NSF standards. The AquaStar Pipeline Filter achieves this same level of clarity in just one turnover, allowing you to maintain crystal-clear water more efficiently.
What This Means for You:
-
Reduced Pump Runtime: With the Pipeline Filter's superior performance, you can achieve desired water clarity in less time, potentially reducing your pump's daily operational hours.
-
Energy Savings: Less pump runtime translates to lower energy consumption, leading to cost savings on your utility bills.
To match the filtration performance of Pipeline Filters, competing filters may need to run five times longer or operate at a flow rate five times higher.
Section 3: New Pump Target
Please select only one option. Once entered, the other will be calculated.
Calculated RPM
Calculated RPM
OR
Calculated GPM
Calculated GPM
Please click the reset button before entering new values
CALCULATION RESULTS
Results Section 1: New Pump Performance
New Flow Rate
New Power Consumption
New RPM
1234
1234
1234
Results Section 2: Cost and Savings
Old Monthly Cost
1223
Monthly Savings
1234
New Monthly Cost
1223
Annual Savings
1234
Calculation Overview (See the Math)
CALCULATION OVERVIEW
<div style="font-family: Arial, sans-serif; color: #333; padding: 10px;"> <h2 style="color: #0066cc;">💡 How Your Savings Are Calculated</h2> <h3 style="color: #333;">📉 Step 1: Adjusted Flow Rate</h3> <p><strong>New GPM:</strong> ${fullSpeedGPM.toFixed(2)} × (${calculatedRPM.toFixed(2)} ÷ ${fullSpeedRPM.toFixed(2)})</p> <p style="font-size: 18px; font-weight: bold; color: #009900;">👉 ${newGPM.toFixed(2)} GPM</p> <h3 style="color: #333;">⚡ Step 2: Adjusted Power Consumption</h3> <p><strong>New Watts:</strong> ${fullSpeedWatts.toFixed(2)} × (${calculatedRPM.toFixed(2)} ÷ ${fullSpeedRPM.toFixed(2)})³</p> <p style="font-size: 18px; font-weight: bold; color: #009900;">👉 ${newWatts.toFixed(2)} W</p> <h3 style="color: #333;">🔋 Step 3: Energy Usage</h3> <ul> <li><strong>Old Energy Consumption:</strong> ${oldDailyEnergy.toFixed(2)} kWh/day</li> <li><strong>New Energy Consumption:</strong> ${newDailyEnergy.toFixed(2)} kWh/day</li> </ul> <h3 style="color: #333;">💰 Step 4: Cost Comparison</h3> <ul> <li><strong>Old Monthly Cost:</strong> <span style="color: red;">$${oldMonthlyCost.toFixed(2)}</span></li> <li><strong>New Monthly Cost:</strong> <span style="color: green;">$${newMonthlyCost.toFixed(2)}</span></li> </ul> <h2 style="color: #0066cc;">💵 Final Savings:</h2> <p style="font-size: 20px; font-weight: bold; color: #ff9900;">💰 Monthly Savings: $${monthlySavings.toFixed(2)}</p> <p style="font-size: 20px; font-weight: bold; color: #ff9900;">💰 Annual Savings: $${annualSavings.toFixed(2)}</p> </div>
Note: Actual results may vary based on pool size, pump capacity, and other factors. It's advisable to monitor your pool's clarity and adjust pump runtime accordingly.