Replacements
Users can now download our files from Google Drive and Dropbox, click the buttons below.
12" Square Retrofit MoFlow™ Suction Outlet Cover
Model # R12MFxxx


VGB Certified
SPECIFICATIONS
Single –
Floor: 274 GPM at 1.3 fps
Wall: 278 GPM at 1.3 fps
69.1 square inch opening
Sump Depth: 3'' Minimum
Product Menu
Click the button to expand each option.
Please use the menu below to find information specific to this product.
Support Files

"One-Click" Downloads
Users can now download every file we offer from our entire drain cover collection or just individual files with "One-Click", through our hosting partners. Click the blue buttons below to go to this products file folder.
Please use the gold links below to download our files from Google Drive.

Please use the gold links below to download our files from DropBox.
Features
Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater
#316 stainless steel screws
Manufactured from superior
UV-resistant engineered polymers
Easily and safely retrofits to most brands’ 1" deep existing frames
All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF/ANSI 50-2009a national standards and ASTM G154 UV testing exposure
Replace drain cover every five years from the date of installation
Product Dimensions
Available Colors
White
Black
Lt Gray
Blue
Dark Gray
Tan
Clear
White
Black
Lt Gray
Blue
Dark Gray
Tan
R12MF101 – White
R12MF102 – Black
R12MF103 – Light Gray
R12MF104 – Blue
R12MF105 – Dark Gray
R12MF108 – Tan
R12MF101 – White
R12MF102 – Black
R12MF103 – Light Gray
R12MF104 – Blue
R12MF105 – Dark Gray
R12MF108 – Tan
R12MF101 – White
R12MF102 – Black
R12MF103 – Light Gray
R12MF104 – Blue
R12MF105 – Dark Gray
R12MF108 – Tan
R12MF101 – White
R12MF102 – Black
R12MF103 – Light Gray
R12MF104 – Blue
R12MF105 – Dark Gray
R12MF108 – Tan
White
Medium Gray
White
Medium Gray
Tan
R12MF101 – White
R12MF102 – Black
R12MF103 – Light Gray
R12MF104 – Blue
R12MF105 – Dark Gray
R12MF108 – Tan
Replacements/Replaces
Replacements
The products shown below are direct replacements to the drain cover shown above. They are designed to fit in/over the existing mud frame. Please ensure that the replacement drain cover has an adequate volumetric flow rating to meet the application's highest flow potential and that the application meets the replacement drain cover's sump depth requirements. For more information about this, please click here.
Model # 1216xxx
Model # R12MFxxx
Single –
Floor: 274 GPM at 1.3 fps
Wall: 278 GPM at 1.3 fps
69.1 square inch opening
Sump Depth: 3'' Minimum
Single -
Floor: 460 GPM at 1.46 fps
Wall: 445 GPM at 1.4 fps
101 square inch opening
Sump Depth: 3'' Minimum
Replaces

The products shown below are discontinued drain covers that the R12MFxxx replaces. The R12MFxxx is designed to fit in/over the existing mud frame. Please ensure that the replacement drain cover has an adequate volumetric flow rating to meet the application's highest flow potential and that the application meets the replacement drain cover's sump depth requirements. For more information about this, please click here.
Model # RWAV12xxx
Model # RFS12xxx
Model # RSUN12xxx
Single -
Floor: 206 GPM at 5.8 fps
Wall: 96 GPM at 2.8 fps
11.2 square inch opening
Single -
Floor:/Wall: 361 GPM at 1.3 fps
85.2 square inch opening
Single -
Floor: 280 GPM at 2.5 fps
Wall: 280 GPM at 2.5 fps
35.3 square inch opening
Product Specific FAQ
Click on a question to see the answer. If you do not see your question below scroll down to the bottom to send us your question.
Does the R12MFxxx have an expiration date?
Yes. The VGB law that went into effect in 2008 requires that all public pools and spas have drain covers that comply with the ASME/ANSI A112.19.8 performance standard, or any successor standard, currently ANSI/APSP 16-2011. This standard requires that manufacturers determine a life expectancy and place a permanent mark with ''Life: X Years'' on each cover to indicate lifespan. At AquaStar, based on UV, structural and fastener testing, we've determined that our drain covers should be replaced every five years from the date of installation, as stated in our instructions. Please look above under ''Support Documents'' to download a Certificate of Compliance for this product. Please fill out and safely store this document, it may be requested during inspection processes.
Will the R12MFxxx replace any other manufacturer drain covers?
Yes, in addition to fitting all AquaStar 12'' retrofit models, the R12MFxxx also fits frames 12'' square 1'' deep mudframes manufactured by Hayward, Waterway, American, and PacFab.
When the cover for the R12MFxxx expires, do I need to replace the mudframe/sump too?
The existing frame/sump must be in good condition, or else it must be replaced.
The drain cover's screws must securely fasten to the frame and have a minimum of three threads of engagement.
The existing frame/sump must be in good condition, or else it must be replaced.
The drain cover's screws must securely fasten to the frame and have a minimum of three threads of engagement.
We do not make a mud frame for the R12MFxxx.
If a replacement mud frame is needed an alternative option to replastering in a new mud frame may be to consider installing our 16'' Square Anti-Entrapment Suction Outlet Cover, Model# 1216xxx (xxx = Color Code). The 1216xxx can be installed with an optional Brass Anchor Kit , Model# BIK4, that will allow the cover to be installed directly to the pool floor without a mud frame. A skilled diver with the appropriate tools may be able to complete this installation without having to drain the pool.
Where can I find the manufacturing date for the R12MFxxx suction outlet cover?
The manufacture date is molded on to each drain cover, it is represented by a small dial that has the year in the center and an arrow pointing to the month.
Does this drain cover replace Hayward 12’’ x 12’’ drain covers? If so, how does it work? The Hayward drain has screws directly in the corners of the cover but the R12MFxxx does not.
Yes, our R12MFxxx replaces both of Haywards Low Velocity and High Flow 12’’ drain covers (Hayward P/N WGX1032BHF2, WGX1032BLV2). Hayward drain covers have screw holes on the corners that attach to an inner frame. The inner frame attaches to the mud frame by screws that are located near the corners, these screw holes match our R12MFxxx. To replace the Hayward drain cover with the R12MFxxx please remove the inner frame. With the inner frame removed the R12MFxxx will fit directly into the 1’’ deep mud frame. Ensure that each screw is secure with at least three threads of engagement.